Menu Đóng

Máy nén khí KTC Italy – DCT 37÷315 KW – 01 tầng nén

ONE STAGE

DCT 37÷315 kW

DCT 37÷315 KW

Single-stage rotary screw compressors with direct transmission

The DCT and DCT – VSD series lubricated screw compressors are particularly indicated for generating industrial use compressed air. In case of continuous and constant air demand the compressed air needs are perfectly satisfied with DCT Fix Speed. In case of non-continuous needs and several daily fluctuations of air demand DCT – VSD is the most suitable solution.

../uploaded_files/attachments/202104161618581746/motore_01.jpg

The selection of low rotation speed motor (4/6 poles in the fixed speed version) and properly sized rotary screws (max 1400 rpm) ensures the bearings a long life.
The variable speed version is equipped with Permanent Magnet Motor.

The selection of low rotation speed motor (4/6 poles in the fixed speed version) and properly sized rotary screws (max 1400 rpm) ensures the bearings a long life.

The variable speed version is equipped with Permanent Magnet Motor.

ADVANTAGES

ADVANTAGES

DCT – VSD version with Permanent Magnet Variable Speed Motor (PM) guarantees an excellent ratio of energy costs and air flow rates.
It also capable of an unlimited operating pressure adjustment. The direct drive fixed speed DCT models are equipped with IE3 motors offering an additional contribution to energy saving.

../uploaded_files/attachments/202104191618820975/advantages_one.jpg

SINGLE STAGE ROTARY SCREW COMPRESSOR

SINGLE STAGE ROTARY SCREW COMPRESSOR

Low rotation speeds allow longer bearings service life. Our Air-End installed on the DCT range has an optimized rotor’s profile from the fluid dynamics point of view. By optimizing the internal circuit, the pressure drops have been further reduced thus obtaining a 8% less energy consumption improving the specific power output.

INDUSTRY 4.0 READY

INDUSTRY 4.0 READY

Ready for Industry 4.0: the compressor can be networked locally or remotely via the internet.


REMOTE CONTROL & CONNECTIVITY ALWAYS WITH YOU!

The KTronic 1000 can be connected to a LAN allowing the compressor to be monitored and managed from a remote PC or a SMARTPHONE.

HOT WATER AT NO COST

Hot water up to 70°C for industrial use, sanitary use or for heating can be obtained by recovering the heat from the oil allowing savings of approximately 85% of the generated thermal energy.

The combination of the heat exchanger with the thermostatic valve and the dedicated pipes circuit can reduce further the costs for generating compressed air.

HEAT RECOVERY AN ALL-ROUND WIN

HEAT RECOVERY AN ALL-ROUND WIN

A huge portion of the electrical drive energy of the electric motor is converted into heat. Thanks to our solution up to 85% of this energy is now available to be used.

USE THE POTENTIAL TO YOUR ADVANTAGE!

PROCESS, HEATING AND SANITARY USE

PROCESS, HEATING AND SANITARY USE

Hot Water up to 70°C  can be produced from reusable compressor heat via heat exchanger systems. Higher water temperature can be reached with a special device upon request.

TECHNOLOGY AND ECO-SUSTAINABILITY

Is our Philosophy

Innovative solution to save money and supporting the environment.

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Máy nén khí KTC Italy – DCT 37÷315 KW – 01 tầng nén”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Contact Me on Zalo